RDM-Toro Hollow Tine hardened, Working-Ø 5/8
| Product number: | RDM-1912761 |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Material Tickness: | 2 mm |
| Mounting diameter: | 19.05 mm = 3/4 Inch |
| Type: | Side eject tine |
| Working depth: | 15.88 mm |
| Working depth: | 75 mm |
rdm-toro hollow tine hardened, working-ø 5/8
The rdm-toro hollow tine hardened, working-ø 5/8 with our part number RDM-1912761 is one of the parts from the broad range of machine parts for garden parc an golf machinery of RDM Parts. We sell not only original parts, but also fitting alternatives. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
rdm-toro hollow tine hardened, working-ø 5/8 for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. Before the purchase, make sure the part number in the manual and our part number closely match. If there is a close match, it will be highly likely that it is a part that fits for the machine. If you have any questions about the part ask them to our parts specialists.
rdm-toro hollow tine hardened, working-ø 5/8 is fitting for these part numbers
The rdm-toro hollow tine hardened, working-ø 5/8 with number RDM-1912761 can be used as a fitting replacement for several parts. The part numbers of these parts are: 91444 1912761.
€7.30*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
rdm-toro hollow tine hardened, working-ø 5/8
The rdm-toro hollow tine hardened, working-ø 5/8 with our part number RDM-1912761 is one of the parts from the broad range of machine parts for garden parc an golf machinery of RDM Parts. We sell not only original parts, but also fitting alternatives. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
rdm-toro hollow tine hardened, working-ø 5/8 for Toro
No machine part is the same. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. The manual consists of lists with parts that are in the machine and the positions of these parts are clarified with drawings. Before the purchase, make sure the part number in the manual and our part number closely match. If there is a close match, it will be highly likely that it is a part that fits for the machine. If you have any questions about the part ask them to our parts specialists.
rdm-toro hollow tine hardened, working-ø 5/8 is fitting for these part numbers
The rdm-toro hollow tine hardened, working-ø 5/8 with number RDM-1912761 can be used as a fitting replacement for several parts. The part numbers of these parts are: 91444 1912761.
Properties
| Product number: | RDM-1912761 |
|---|---|
| Manufacturer | RDM Parts |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Material Tickness: | 2 mm |
| Mounting diameter: | 19.05 mm = 3/4 Inch |
| Type: | Side eject tine |
| Working depth: | 15.88 mm |
| Working depth: | 75 mm |