R201536
| Product number: | R201536 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.7 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | John Deere Aercore 800, John Deere Aercore 1000, John Deere Aercore 1500, John Deere Aercore 2000, Ryan GA30, Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Mounting diameter: | 0,75 inch |
| Type: | Alloy Machined Side-Eject |
Machine part R201536 is a from our big online parts assortment. We sell not only original parts, but also fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is the case, the part will most likely fit for the machine. If you have any questions at all about the product, ask our parts staff for advice.
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Machine part R201536 is a from our big online parts assortment. We sell not only original parts, but also fitting alternatives. Service is important to us so if you have any questions about a part or machine, you can always ask us for advice.
for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. This manual schematically shows which part goes where on the machine, with a handy list of all parts that are in there. Also doublecheck the part number on our website to see if it is closely matched to the part number of the machine. If this is the case, the part will most likely fit for the machine. If you have any questions at all about the product, ask our parts staff for advice.
Properties
| Product number: | R201536 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Wall thickness: | 1.7 mm |
|---|---|
| Suitable for brand: | Toro |
| Suitable for machine: | John Deere Aercore 800, John Deere Aercore 1000, John Deere Aercore 1500, John Deere Aercore 2000, Ryan GA30, Toro ProCore 440, Toro ProCore 648, Toro ProCore 648s, Toro ProCore 660, Toro ProCore 864, Toro ProCore 880, Toro ProCore 1298 |
| Mounting diameter: | 0,75 inch |
| Type: | Alloy Machined Side-Eject |