Hydraulic filters
Product number: | HF7952 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 99.82 mm |
Gasket outer diameter: | 109.22 mm |
Outside diameter: | 135.74 mm |
Thread type: | M42 X 2-6H INT |
Fleetguard hydraulic filter HF7952
In a hydraulic system, oil ensures the transmission of the forces. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF7952 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF7952
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 100,48 mm. The filter has an outer diameter of 135,74 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF7952
In a hydraulic system, oil ensures the transmission of the forces. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF7952 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF7952
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 100,48 mm. The filter has an outer diameter of 135,74 mm.Properties
Product number: | HF7952 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 99.82 mm |
Gasket outer diameter: | 109.22 mm |
Outside diameter: | 135.74 mm |
Thread type: | M42 X 2-6H INT |