Hydraulic filters
Product number: | HF6885 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Outside in |
Gasket inner diameter: | 22 mm |
Outside diameter: | 51.5 mm |
Fleetguard hydraulic filter HF6885
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguard has a hydraulic filter with number HF6885 that takes the dirt out of the oil. This is done by separating moisture and particles from the oil. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF6885
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF6885 is a worthy replacement for a worn filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The filter has an outer diameter of 51,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF6885
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguard has a hydraulic filter with number HF6885 that takes the dirt out of the oil. This is done by separating moisture and particles from the oil. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF6885
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF6885 is a worthy replacement for a worn filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The filter has an outer diameter of 51,5 mm.Properties
Product number: | HF6885 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Outside in |
Gasket inner diameter: | 22 mm |
Outside diameter: | 51.5 mm |