Hydraulic filters
Product number: | HF6706 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 128.93 mm |
Thread type: | 2 1/2-16 UN-2B |
Fleetguard hydraulic filter HF6706
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF6706 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF6706 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6706
Make sure to replace the filter in a timely manner. A hydraulic filter such as Fleetguard's HF6706 is a good and qualitative replacement for a worn hydraulic filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 170,41 mm. The filter has an outer diameter of 128,93 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF6706
A hydraulic system of a machine works with oil. A defect in such a system starts in 90 % of cases because the oil is contaminated. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF6706 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF6706 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6706
Make sure to replace the filter in a timely manner. A hydraulic filter such as Fleetguard's HF6706 is a good and qualitative replacement for a worn hydraulic filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 170,41 mm. The filter has an outer diameter of 128,93 mm.Properties
Product number: | HF6706 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 128.93 mm |
Thread type: | 2 1/2-16 UN-2B |