Hydraulic filters
Product number: | HF35554 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|
Fleetguard hydraulic filter HF35554
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguard has a hydraulic filter with number HF35554 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF35554 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35554
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF35554 is a worthy replacement for a worn filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 294,89 mm. The filter has an outer diameter of 4,6 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF35554
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguard has a hydraulic filter with number HF35554 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF35554 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35554
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF35554 is a worthy replacement for a worn filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 294,89 mm. The filter has an outer diameter of 4,6 mm.Properties
Product number: | HF35554 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|