Hydraulic filters
Product number: | HF35438 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket outer diameter: | 86.11 mm |
Outside diameter: | 121 mm |
Fleetguard hydraulic filter HF35438
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF35438 filters the pollution out of the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF35438 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35438
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 361,7 mm. The filter has an outer diameter of 121 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF35438
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF35438 filters the pollution out of the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF35438 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35438
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 361,7 mm. The filter has an outer diameter of 121 mm.Properties
Product number: | HF35438 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket outer diameter: | 86.11 mm |
Outside diameter: | 121 mm |