Hydraulic filters
Product number: | HF35364 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Outside in |
Gasket inner diameter: | 27.6 mm |
Outside diameter: | 62.5 mm |
Fleetguard hydraulic filter HF35364
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguard has a hydraulic filter with number HF35364 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF35364 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35364
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 205 mm. The filter has an outer diameter of 62,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF35364
Hydraulic oil is the driving force behind the hydraulic system. In almost all cases, a defect in the system is initially caused by contaminated oil. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguard has a hydraulic filter with number HF35364 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF35364 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35364
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 205 mm. The filter has an outer diameter of 62,5 mm.Properties
Product number: | HF35364 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Flow Direction: | Outside in |
Gasket inner diameter: | 27.6 mm |
Outside diameter: | 62.5 mm |