Hydraulic filters
| Product number: | HF35254 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 57.4 mm |
| Gasket outer diameter: | 64.01 mm |
| Outside diameter: | 80.77 mm |
| Thread type: | 3/4-16 UNF-2B |
Fleetguard hydraulic filter HF35254
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF35254 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF35254 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35254
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 102,11 mm. The filter has an outer diameter of 80,77 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF35254
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF35254 extracts the residue from the oil. This is done by separating moisture and particles from the oil. Use the parts book to check if you can use the HF35254 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF35254
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 102,11 mm. The filter has an outer diameter of 80,77 mm.Properties
| Product number: | HF35254 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 57.4 mm |
| Gasket outer diameter: | 64.01 mm |
| Outside diameter: | 80.77 mm |
| Thread type: | 3/4-16 UNF-2B |