Hydraulic filters
Product number: | HF29078 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket outer diameter: | 70 mm |
Outside diameter: | 97 mm |
Fleetguard hydraulic filter HF29078
In a hydraulic system, oil ensures the transmission of the forces. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF29078 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF29078 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF29078
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 240 mm. The filter has an outer diameter of 97 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF29078
In a hydraulic system, oil ensures the transmission of the forces. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF29078 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF29078 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF29078
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 240 mm. The filter has an outer diameter of 97 mm.Properties
Product number: | HF29078 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket outer diameter: | 70 mm |
Outside diameter: | 97 mm |