Hydraulic filters
Product number: | HF29069 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 88.9 mm |
Fleetguard hydraulic filter HF29069
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF29069 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF29069 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF29069
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 359,87 mm. The filter has an outer diameter of 88,9 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF29069
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF29069 that takes the dirt out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF29069 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF29069
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 359,87 mm. The filter has an outer diameter of 88,9 mm.Properties
Product number: | HF29069 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 88.9 mm |