Hydraulic filters
| Product number: | HF28850 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 62.53 mm |
| Gasket outer diameter: | 71.98 mm |
| Outside diameter: | 93.12 mm |
| Thread type: | 1 1/8-16 UN-2B |
Fleetguard hydraulic filter HF28850
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF28850 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF28850
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF28850 is a worthy replacement for a worn filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 131,7 mm. The filter has an outer diameter of 93,12 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF28850
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF28850 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF28850
Make sure to replace the filter in a timely manner. A good hydraulic filter such as Fleetguards HF28850 is a worthy replacement for a worn filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 131,7 mm. The filter has an outer diameter of 93,12 mm.Properties
| Product number: | HF28850 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Gasket inner diameter: | 62.53 mm |
| Gasket outer diameter: | 71.98 mm |
| Outside diameter: | 93.12 mm |
| Thread type: | 1 1/8-16 UN-2B |