Hydraulic filters
Product number: | HF28767 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 62.53 mm |
Gasket outer diameter: | 71.98 mm |
Outside diameter: | 93.47 mm |
Thread type: | 1 1/8-16 UN-2B |
Fleetguard hydraulic filter HF28767
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF28767 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF28767 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28767
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 204,98 mm. The filter has an outer diameter of 93,47 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF28767
Hydraulic oil is the driving force behind the hydraulic system. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. A hydraulic filter such as Fleetguards HF28767 extracts the residue from the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF28767 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28767
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 204,98 mm. The filter has an outer diameter of 93,47 mm.Properties
Product number: | HF28767 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 62.53 mm |
Gasket outer diameter: | 71.98 mm |
Outside diameter: | 93.47 mm |
Thread type: | 1 1/8-16 UN-2B |