Fuel filters/fws
Product number: | FS20073 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 88.14 mm |
Fleetguard fuel filter FS20073
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS20073of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS20073 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 153,67 mm. The filter has an outer diameter of 88,14 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS20073
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS20073of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS20073 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 153,67 mm. The filter has an outer diameter of 88,14 mm.Properties
Product number: | FS20073 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 88.14 mm |