Fuel filters/fws
| Product number: | FS19933 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 107.67 mm |
| Thread type: | 1-14 UNF-2B |
Fleetguard fuel filter FS19933
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS19933 of Fleetguard. Before replacement, check the parts manual to make sure the FS19933 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 207,98 mm. The filter has an outer diameter of 107,67 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS19933
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS19933 of Fleetguard. Before replacement, check the parts manual to make sure the FS19933 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 207,98 mm. The filter has an outer diameter of 107,67 mm.Properties
| Product number: | FS19933 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 107.67 mm |
| Thread type: | 1-14 UNF-2B |