Fuel filters/fws
Product number: | FS19593 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 107.95 mm |
Fleetguard fuel filter FS19593
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FS19593 of Fleetguard. Before replacement, check the parts manual to make sure the FS19593 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 158,75 mm. The filter has an outer diameter of 107,95 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS19593
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FS19593 of Fleetguard. Before replacement, check the parts manual to make sure the FS19593 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 158,75 mm. The filter has an outer diameter of 107,95 mm.Properties
Product number: | FS19593 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 107.95 mm |