Fuel filters/fws

Fleetguard fuel filter FS19544 FS19544

The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Ensure a regular replacement of the fuel filter FS19544 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS19544 fit it.

Replacing the Fleetguard fuel filter

The fuel runs through the fuel hose to the combustion chamber of the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.