Fuel filters/fws
| Product number: | FS1283 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 128.26 mm |
Fleetguard fuel filter FS1283
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS1283 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1283 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 278,76 mm. The filter has an outer diameter of 128,26 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS1283
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS1283 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1283 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 278,76 mm. The filter has an outer diameter of 128,26 mm.Properties
| Product number: | FS1283 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 128.26 mm |