Fuel filters/fws
Product number: | FS1214 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 93.47 mm |
Thread type: | 1-14 UNS-2B |
Fleetguard fuel filter FS1214 FS1214
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS1214of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1214 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 202,69 mm. The filter has an outer diameter of 93,47 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS1214 FS1214
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FS1214of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1214 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 202,69 mm. The filter has an outer diameter of 93,47 mm.Properties
Product number: | FS1214 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 93.47 mm |
Thread type: | 1-14 UNS-2B |