fuel filter FF5854
| Product number: | FF5854 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 82.42 mm |
Fleetguard fuel filter FF5854 FF5854
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF5854 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5854 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 82,37 mm. The filter has an outer diameter of 82,42 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5854 FF5854
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FF5854 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5854 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 82,37 mm. The filter has an outer diameter of 82,42 mm.Properties
| Product number: | FF5854 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 82.42 mm |