Fuel filters/fws
| Product number: | FF5540 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 93.6 mm |
Fleetguard fuel filter FF5540
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5540 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5540 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 196,7 mm. The filter has an outer diameter of 93,6 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5540
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5540 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5540 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual prescribes where the fuel filter is mounted on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 196,7 mm. The filter has an outer diameter of 93,6 mm.Properties
| Product number: | FF5540 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 93.6 mm |