Lube filters
Product number: | LF16034 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 57.4 mm |
Gasket outer diameter: | 64.01 mm |
Outside diameter: | 80.77 mm |
Thread type: | M20 X 1.5-6H INT |
Fleetguard oil filter LF16034
Moving parts in the machine are lubricated with oil. The oil ensures the small particles that form by operation of the machine are absorbed to ensure everything moves normally. The oil filter LF16034 from Fleetguard takes these contamination from the oil. Look at the farts manual to see if the filter from Fleetguard with article number LF16034 fits on your machine.
Replace the Fleetguard oil filter
The use of the machine will pump the oil through the oil filter to get rid of the contaminants. After many hours of work, the oil filter will slowly start to get clogged signalling it is time for a new oil filter from Fleetguard. These oil filters are often mounted in a place that is not very accessible. We advise a rubber strap, chain or wrench to make it easier to dismount the oil filter. While you are busy replacing the oil filter, remember to replace the old oil so you start out with a clean system.
The height of the product is 89,41 mm. The filter has an outer diameter of 80,77 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard oil filter LF16034
Moving parts in the machine are lubricated with oil. The oil ensures the small particles that form by operation of the machine are absorbed to ensure everything moves normally. The oil filter LF16034 from Fleetguard takes these contamination from the oil. Look at the farts manual to see if the filter from Fleetguard with article number LF16034 fits on your machine.
Replace the Fleetguard oil filter
The use of the machine will pump the oil through the oil filter to get rid of the contaminants. After many hours of work, the oil filter will slowly start to get clogged signalling it is time for a new oil filter from Fleetguard. These oil filters are often mounted in a place that is not very accessible. We advise a rubber strap, chain or wrench to make it easier to dismount the oil filter. While you are busy replacing the oil filter, remember to replace the old oil so you start out with a clean system.
The height of the product is 89,41 mm. The filter has an outer diameter of 80,77 mm.Properties
Product number: | LF16034 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 57.4 mm |
Gasket outer diameter: | 64.01 mm |
Outside diameter: | 80.77 mm |
Thread type: | M20 X 1.5-6H INT |