B.C.S. Tiller blade parts
- Article number: 808-bcs-13r
- Article number: 808-bcs-04l
- Article number: 808-bcs-01l
- Article number: 808-bcs-04r
- Article number: 808-bcs-06r
- Article number: 808-bcs-13l
- Article number: 808-bcs-14l
- Article number: 808-gri-06l
- Article number: 808-gri-06r
- Article number: 808-bcs-07l
- Article number: 808-bcs-14r
- Article number: 808-bcs-06l
- Article number: 808-bcs-07r
- Article number: 808-bcs-01r
- Article number: 808-63-bcs-20
Tiller blades and accessories for your B.C.S. machine
The wearing parts that fit your B.C.S. machinery are available at RDM Parts. You want to keep the results of your machine optimal, that’s why it is important to replace wearing parts in time. If your Tiller blades are dull, they will perform less and this will lead to more use of gas or defects to your machine. You can find the right parts for replacement in the parts book ofyour B.C.S..
attach Tiller blades to your B.C.S. machinery
A rotary tiller has blades that are alternately attached. This also makes half of the blades turns left and the other half turns right. There is a difference between the positioning of the cutting surface. Check if the blade turns right or left when you replace the blade.
The shape of your B.C.S. tiller blades
The shape of your tiller blades determines the power that is needed by your B.C.S. machinery to process the soil. There are the incremental C shaped blades that require less power than the L shaped blades. These blades are used more often at tiller depths of 5 centimetres or more and can be used at higher speeds.
The perpendicular L shaped tiller blade from B.C.S. needs more power from the machine. This is caused by the form because it is less efficient. At shallow depts of less than 5 centimetres the L shaped blade is often used. A clear advantage of the blade is that it prevents soil compacting.
B.C.S. tiller blade sizes
To find the right parts for your B.C.S. machinery you can use the convenient filters at the top of the page. Check the size between the connection holes and the width of the blade. The tilling dept and the limits of your machinery determine the length of the blade.