Marsk-stig parts

Marsk-Stig Parts: Find all necessary Marsk-Stig parts for optimal operation. These parts guarantee precise results and contribute to your Marsk-Stig machine's longevity.

RDM Parts Bolt with self-locking nut - M10x1,5 - 10.9 fitting for Bomford 03.675.25 - 05.775.02

808-63-1085

€1.51 *

€1.83 incl. VAT

Delivery time 3 days.

RDM Parts Bolt with self-locking nut - M10 - 10.9 fitting for Agria Schraube: 256932042 - Mutter: 261105010

808-63-1065-1

€1.43 *

€1.73 incl. VAT

Delivery time 3 days.

Packer ring - Ø800

808-313-803

€248.26 *

€300.39 incl. VAT

Delivery time 3 days.

Packer ring - Ø800

808-313-800

€248.26 *

€300.39 incl. VAT

Delivery time 3 days.

Cultivator bolt - M10x37 - 8.8 fitting for Rau 0044245

808-30.003-8

€0.55 *

€0.67 incl. VAT

Delivery time 3 days.

Hexagon bolt M12 without nut fitting for Marsk-Stig 90075008

808-12459318

€0.55 *

€0.67 incl. VAT

Delivery time 3 days.

Point fitting for Bottmersdorf 0200-11-043-0

808-101.60232

€32.35 *

€39.14 incl. VAT

Delivery time 3 days.

Stubble share fitting for Bottmersdorf 0200-11-026-0

808-101.60231

€80.46 *

€97.36 incl. VAT

Delivery time 3 days.

Jumbo-tine

808-101.06046

€211.87 *

€256.36 incl. VAT

Delivery time 3 days.

Pin - 3/8" fitting for Marsk-Stig 90060375

808-1.60375

€2.21 *

€2.67 incl. VAT

Delivery time 3 days.

Bolt - M16 fitting for Marsk-Stig 90060300

808-1.60300

€1.66 *

€2.01 incl. VAT

Delivery time 3 days.

Harrow tines Marsk-Stig

808-1.40440

€296.25 *

€358.46 incl. VAT

Delivery time 3 days.

Clamp with bolts fitting for Marsk-Stig 01010101

808-1.40407

€56.27 *

€68.09 incl. VAT

Delivery time 3 days.

Clamp with bolts fitting for Marsk-Stig 01010104

808-1.40406

€68.90 *

€83.37 incl. VAT

Delivery time 3 days.

Inner tine fitting for Marsk-Stig 01010042

808-1.40403

€31.86 *

€38.55 incl. VAT

Delivery time 3 days.

Outer tine fitting for Marsk-Stig 01010041

808-1.40402

€31.86 *

€38.55 incl. VAT

Delivery time 3 days.

Main tine fitting for Marsk-Stig 01010127

808-1.40401

€136.53 *

€165.20 incl. VAT

Delivery time 3 days.

Clamp for Marsk-Stig fitting for Marsk-Stig 01010177

808-1.10177

€11.33 *

€13.71 incl. VAT

Delivery time 3 days.

Clamp for tine 32 x 10 fitting for Marsk-Stig 01010159

808-1.10159

€10.92 *

€13.21 incl. VAT

Delivery time 3 days.

Lower part fitting for Marsk-Stig 01010126

808-1.10126

€124.36 *

€150.48 incl. VAT

Delivery time 3 days.

Harrow tines Marsk-Stig fitting for Marsk-Stig 01010092

808-1.10092

€463.65 *

€561.02 incl. VAT

Delivery time 3 days.

Compact harrow tine 32x10 with share fitting for Marsk-Stig 01010080

808-1.10080

€73.50 *

€88.94 incl. VAT

Delivery time 3 days.

Share 90mm fitting for Marsk-Stig 01010065

808-1.10065

€17.01 *

€20.58 incl. VAT

Delivery time 3 days.

Share 65mm fitting for Marsk-Stig 01010064

808-1.10064

€11.52 *

€13.94 incl. VAT

Delivery time 3 days.

1
2

Zelfborgende moer and accessories for your Marsk-Stig machine

RDM Pars has wearing parts that fit your Marsk-Stig rotary tiller. If parts wear down it will cause your machine to lack performance. When your Zelfborgende moer gets dull it will impact the performance and it raises gas use and defects. Find the right parts with the parts manual of your Marsk-Stig.

the attaching of Zelfborgende moer

Alternating the blades of the rotary tiller ensures optimal processing of the soil. This makes half of the blades tillers left and the other half of the tiller blades right. Check the cuttins surfaces of the blades, these should all be the right way up. Check if the blade turns right or left when you replace the blade.

Attaching C shaped or L shaped tiller blades

The force that is needed to power your Marsk-Stig rotary tiller is determined by the shape of the blade and the extend of processing you want to do to the soil. A C shaped blade needs less power to tiller than a L shaped blade. This blade in C shape is mostly used at deeper tilling depts

An L shaped Marsk-Stig tiller blade has a sharper angle. This is caused by the form because it is less efficient. If the tiller depth is less than 5 centimetres than the L shape occurs more often.

Marsk-Stig tiller blade sizes

Finding the right tiller blade that fits your Marsk-Stig machinery becomes easy with our handy filters. Besides the left or right turning of the blade it is important to check if the distance between the connection holes and the width of the blade is exactly the same as your current tiller blades. The total length determines the tilling dept.

Find the right part fast

Marsk-stig parts

Zelfborgende moer and accessories for your Marsk-Stig machine

the attaching of Zelfborgende moer

Attaching C shaped or L shaped tiller blades

Marsk-Stig tiller blade sizes