OMARV Tiller blade parts
- Article number: 808-63-oma-06
- Article number: 808-63-rm-4-18
- Article number: 808-63-oma-05
- Article number: 808-63-rm-4
- Article number: 808-63-nob-05
Tiller blades and accessories for your OMARV machine
The wearing parts that fit your OMARV machinery are available at RDM Parts. If parts wear down it will cause your machine to lack performance. Dull and worn down parts need more power to operate. This uses more fuel and can cause defects. Find the right parts with the parts manual of your OMARV.
Attaching Tiller blades to your machine
A rotary tiller has blades that are alternately attached. This also makes half of the blades turns left and the other half turns right. Check the cuttins surfaces of the blades, these should all be the right way up. If you replace the blades of your OMARV rotary tiller check if your replace a blade that turns left or right.
Attaching C shaped or L shaped tiller blades
Check the shape of your OMARV tiller blades, these determine how much force is needed to power them. A C shaped blade needs less power to tiller than a L shaped blade. If you need to perform at a deep tiller dept C shaped blades are mostly used.
The perpendicular L shaped tiller blade from OMARV needs more power from the machine. For this reason the L shaped blade is used at tilling depts of less than 5 centimetres. If the tiller depth is less than 5 centimetres than the L shape occurs more often.
OMARV tiller blade sizes
Handy filters help you with finding the right tiller blades for your OMARV machinery. There are a couple of factors that determine if the blade fits, like: the distance between the connection holes and the width of the blade. The total length determines the tilling dept.