TINE - NEEDLE 5MM (.196) X 3.5
| Product number: | R201422 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Suitable for machine: | Jacobsen GA-24, Ryan GA30, Ryan Greensaire II, Toro Greens Aerator |
| Mounting diameter: | 0,197 inch |
| Outside diameter: | 5 mm |
| Type: | Alloy Solid Needle |
tine - needle 5mm (.196) x 3.5
Machine part R201422 is a tine - needle 5mm (.196) x 3.5 from our big online parts assortment. In this assortment you will find non-original parts and fitting alternatives. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
tine - needle 5mm (.196) x 3.5 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. A parts manual or machine manual clearly shows which parts belong in the machine. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is similar it is very likely you have the right part. If you have any questions about the part ask them to our parts specialists.
tine - needle 5mm (.196) x 3.5 is fitting for these part numbers
The tine - needle 5mm (.196) x 3.5 with number R201422 can be used as a fitting replacement for several parts. The part numbers of these parts are: 13998.p>.
€2.57*
- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
tine - needle 5mm (.196) x 3.5
Machine part R201422 is a tine - needle 5mm (.196) x 3.5 from our big online parts assortment. In this assortment you will find non-original parts and fitting alternatives. At RDM Parts we focus on service, you can always ask us a question about the part or about your machine.
tine - needle 5mm (.196) x 3.5 for Toro
There are many differences between the parts of a machine, however close they may be in appearance. A check in the machine manual or parts manual of Toro is a good measure to make sure the parts fit for your machine. A parts manual or machine manual clearly shows which parts belong in the machine. When doing a purchase, have a good look and compare the part number of the machine with our part number for similarities. If this is similar it is very likely you have the right part. If you have any questions about the part ask them to our parts specialists.
tine - needle 5mm (.196) x 3.5 is fitting for these part numbers
The tine - needle 5mm (.196) x 3.5 with number R201422 can be used as a fitting replacement for several parts. The part numbers of these parts are: 13998.p>.
Properties
| Product number: | R201422 |
|---|---|
| Manufacturer | R&R Products |
Technical details
| Suitable for brand: | Toro |
|---|---|
| Suitable for machine: | Jacobsen GA-24, Ryan GA30, Ryan Greensaire II, Toro Greens Aerator |
| Mounting diameter: | 0,197 inch |
| Outside diameter: | 5 mm |
| Type: | Alloy Solid Needle |