Hydraulic spin-on synthetic
| Product number: | HF6712 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 170.41 mm |
| Outside diameter: | 128.93 mm |
| Thread type: | 2 1/2-16 UN-2B |
Fleetguard hydraulic filter HF6712
In a hydraulic system, oil ensures the transmission of the forces. A defect in such a system starts in 90 % of cases because the oil is contaminated. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF6712 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF6712 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6712
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 170,41 mm. The filter has an outer diameter of 128,93 mm.€72.29 * €87.47
€87.47 incl. VAT
€87.47*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Hydraulic spin-on synthetic"
Fleetguard hydraulic filter HF6712
In a hydraulic system, oil ensures the transmission of the forces. A defect in such a system starts in 90 % of cases because the oil is contaminated. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF6712 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF6712 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6712
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 170,41 mm. The filter has an outer diameter of 128,93 mm.Properties
| Product number: | HF6712 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 170.41 mm |
| Outside diameter: | 128.93 mm |
| Thread type: | 2 1/2-16 UN-2B |