Hydraulic spin-on synthetic
| Product number: | HF6607 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 203.71 mm |
| Outside diameter: | 93.47 mm |
| Gasket inner diameter: | 75.44 mm |
| Gasket outer diameter: | 87.63 mm |
| Thread type: | 2 1/2-16 UN-2B |
| Weight: | 1 kg |
Fleetguard hydraulic filter HF6607
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF6607 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Check the parts manual to make sure the filter with item number HF6607 is appropriate for the machine.
Replacement of the Fleetguard Hydraulic Filter HF6607
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 203,71 mm. The filter has an outer diameter of 93,47 mm.€61.86 * €74.85
€74.85 incl. VAT
€74.85*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Hydraulic spin-on synthetic"
Fleetguard hydraulic filter HF6607
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF6607 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Check the parts manual to make sure the filter with item number HF6607 is appropriate for the machine.
Replacement of the Fleetguard Hydraulic Filter HF6607
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. This is also reflected in the machine manual along with the replacement interval of the filter.
The height of the product is 203,71 mm. The filter has an outer diameter of 93,47 mm.Properties
| Product number: | HF6607 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 203.71 mm |
| Outside diameter: | 93.47 mm |
| Gasket inner diameter: | 75.44 mm |
| Gasket outer diameter: | 87.63 mm |
| Thread type: | 2 1/2-16 UN-2B |
| Weight: | 1 kg |