Hydraulic filters
Product number: | HF6574 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 63.75 mm |
Gasket outer diameter: | 70.97 mm |
Outside diameter: | 97.89 mm |
Thread type: | 1 3/8-12 UNF-2B |
Fleetguard hydraulic filter HF6574
A hydraulic system of a machine works with oil. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguards hydraulic filter with number HF6574 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF6574 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6574
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 153,67 mm. The filter has an outer diameter of 97,89 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF6574
A hydraulic system of a machine works with oil. A defect in this system is due to contaminated oil in 9 out of 10 cases. Due to the movement of parts, they wear out slowly and these particles in turn cause more wear and tear due to the increased friction. Fleetguards hydraulic filter with number HF6574 filters the pollution out of the oil. The result is a hydraulic system that is less likely to fail because the harmful particles gradually remain in the fine membrane of the filter. Use the parts book to check if you can use the HF6574 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF6574
A hydraulic system remains optimally effective if the hydraulic filter is replaced in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 153,67 mm. The filter has an outer diameter of 97,89 mm.Properties
Product number: | HF6574 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 63.75 mm |
Gasket outer diameter: | 70.97 mm |
Outside diameter: | 97.89 mm |
Thread type: | 1 3/8-12 UNF-2B |