Hydraulic filters
Product number: | HF30008 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 75.44 mm |
Gasket outer diameter: | 87.63 mm |
Outside diameter: | 93.47 mm |
Thread type: | 2 1/2-16 UN-2B |
Fleetguard hydraulic filter HF30008
In a hydraulic system, oil ensures the transmission of the forces. In almost all cases, a defect in the system is initially caused by contaminated oil. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF30008 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF30008
Make sure to replace the filter in a timely manner. A hydraulic filter such as Fleetguard's HF30008 is a good and qualitative replacement for a worn hydraulic filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 147,83 mm. The filter has an outer diameter of 93,47 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF30008
In a hydraulic system, oil ensures the transmission of the forces. In almost all cases, a defect in the system is initially caused by contaminated oil. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF30008 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF30008
Make sure to replace the filter in a timely manner. A hydraulic filter such as Fleetguard's HF30008 is a good and qualitative replacement for a worn hydraulic filter. The location of the hydraulic system mainly determines where the hydraulic filter is placed on the machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 147,83 mm. The filter has an outer diameter of 93,47 mm.Properties
Product number: | HF30008 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Gasket inner diameter: | 75.44 mm |
Gasket outer diameter: | 87.63 mm |
Outside diameter: | 93.47 mm |
Thread type: | 2 1/2-16 UN-2B |