Hydraulic filters
| Product number: | HF28806 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Sabo |
|---|---|
| Product type: | Filters |
| Gasket inner diameter: | 62 mm |
| Gasket outer diameter: | 70.4 mm |
| Outside diameter: | 93.5 mm |
| Thread type: | 1-12 UNF-2B |
Fleetguard hydraulic filter HF28806
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF28806 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF28806 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28806
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 211,1 mm. The filter has an outer diameter of 93,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF28806
A hydraulic system of a machine works with oil. In almost all cases, a defect in the system is initially caused by contaminated oil. The particles that are caused by wear and tear are absorbed by the oil. Fleetguard has a hydraulic filter with number HF28806 that takes the dirt out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Use the parts book to check if you can use the HF28806 for your machine.
Replacement of the Fleetguard Hydraulic Filter HF28806
Make sure to replace the filter in a timely manner. To ensure good filtration, it is best to replace the filters with a high-quality filter such as the Fleetguard filter. The location of the hydraulic filter depends on the type of machine and the location of the hydraulic system. The machine's part manual indicates where the filter is and after how many hours the hydraulic filter can best be replaced.
The height of the product is 211,1 mm. The filter has an outer diameter of 93,5 mm.Properties
| Product number: | HF28806 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Suitable for brand: | Sabo |
|---|---|
| Product type: | Filters |
| Gasket inner diameter: | 62 mm |
| Gasket outer diameter: | 70.4 mm |
| Outside diameter: | 93.5 mm |
| Thread type: | 1-12 UNF-2B |