Fuel separator spinon
| Product number: | FS36235S |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Brand: | Fleetguard |
Fleetguard fuel filter FS36235S
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS36235Sof Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS36235S fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 286,6 mm. The filter has an outer diameter of 111 mm.€50.08 * €60.60
€60.60 incl. VAT
€60.60*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS36235S
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS36235Sof Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS36235S fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 286,6 mm. The filter has an outer diameter of 111 mm.Properties
| Product number: | FS36235S |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Brand: | Fleetguard |