Fuel separator spinon stratapore
| Product number: | FS20121 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1.406 kg |
Fleetguard fuel filter FS20121 FS20121
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS20121 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20121 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
€137.74 * €166.67
€166.67 incl. VAT
€166.67*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon stratapore"
Fleetguard fuel filter FS20121 FS20121
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FS20121 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20121 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
Properties
| Product number: | FS20121 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Weight: | 1.406 kg |