Fuel filters/fws
Product number: | FS20048 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 85 mm |
Fleetguard fuel filter FS20048 FS20048
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS20048of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20048 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 166,2 mm. The filter has an outer diameter of 85 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS20048 FS20048
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS20048of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20048 fit it.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Make sure you connect the fuel filter in the right way.
The height of the product is 166,2 mm. The filter has an outer diameter of 85 mm.Properties
Product number: | FS20048 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 85 mm |