Fuel filters/fws
Product number: | FS20014 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 93.5 mm |
Fleetguard fuel filter FS20014 FS20014
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FS20014of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20014 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 202 mm. The filter has an outer diameter of 93,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS20014 FS20014
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FS20014of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS20014 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 202 mm. The filter has an outer diameter of 93,5 mm.Properties
Product number: | FS20014 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 93.5 mm |