Fuel separator spinon
| Product number: | FS19946 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 338.83 mm |
| Outside diameter: | 129.54 mm |
Fleetguard fuel filter FS19946
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS19946 of Fleetguard. Before replacement, check the parts manual to make sure the FS19946 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 338,83 mm. The filter has an outer diameter of 129,54 mm.€131.74 * €159.41
€159.41 incl. VAT
€159.41*
Create label
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS19946
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS19946 of Fleetguard. Before replacement, check the parts manual to make sure the FS19946 part fits for your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 338,83 mm. The filter has an outer diameter of 129,54 mm.Properties
| Product number: | FS19946 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 338.83 mm |
| Outside diameter: | 129.54 mm |