Fuel separator spinon
| Product number: | FS19931 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 171.17 mm |
| Outside diameter: | 107.67 mm |
| Thread type: | 1-14 UNF-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FS19931 FS19931
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter regularly with the fuel filter FS19931 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS19931 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 171,17 mm. The filter has an outer diameter of 107,67 mm.€51.69 * €62.54
€62.54 incl. VAT
€62.54*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS19931 FS19931
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter regularly with the fuel filter FS19931 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FS19931 fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 171,17 mm. The filter has an outer diameter of 107,67 mm.Properties
| Product number: | FS19931 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 171.17 mm |
| Outside diameter: | 107.67 mm |
| Thread type: | 1-14 UNF-2B |
| Weight: | 1 kg |