Fuel separator spinon
| Product number: | FS19683 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 187.32 mm |
| Outside diameter: | 93.73 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FS19683
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS19683 of Fleetguard. Before replacement, check the parts manual to make sure the FS19683 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 187,32 mm. The filter has an outer diameter of 93,73 mm.€34.27 * €41.47
€41.47 incl. VAT
€41.47*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS19683
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter regularly with the fuel filter FS19683 of Fleetguard. Before replacement, check the parts manual to make sure the FS19683 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 187,32 mm. The filter has an outer diameter of 93,73 mm.Properties
| Product number: | FS19683 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 187.32 mm |
| Outside diameter: | 93.73 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |