Fuel separator spinon stratapore
| Product number: | FS19519 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 146.05 mm |
| Outside diameter: | 93.83 mm |
| Thread type: | M20 X 1.5-6H INT |
| Weight: | 1 kg |
Fleetguard fuel filter FS19519 FS19519
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FS19519 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS19519 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 146,05 mm. The filter has an outer diameter of 93,83 mm.€41.84 * €50.63
€50.63 incl. VAT
€50.63*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon stratapore"
Fleetguard fuel filter FS19519 FS19519
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Ensure a regular replacement of the fuel filter FS19519 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS19519 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 146,05 mm. The filter has an outer diameter of 93,83 mm.Properties
| Product number: | FS19519 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 146.05 mm |
| Outside diameter: | 93.83 mm |
| Thread type: | M20 X 1.5-6H INT |
| Weight: | 1 kg |