Fuel separator spinon
| Product number: | FS1240 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 98.04 mm |
| Outside diameter: | 93.04 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FS1240
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS1240 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS1240 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 98,04 mm. The filter has an outer diameter of 93,04 mm.€36.46 * €44.12
€44.12 incl. VAT
€44.12*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon"
Fleetguard fuel filter FS1240
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FS1240 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS1240 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Make sure you connect the fuel filter in the right way.
The height of the product is 98,04 mm. The filter has an outer diameter of 93,04 mm.Properties
| Product number: | FS1240 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 98.04 mm |
| Outside diameter: | 93.04 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |