Fuel filters/fws
| Product number: | FS1203 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 76.45 mm |
Fleetguard fuel filter FS1203
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS1203of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS1203 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 122,17 mm. The filter has an outer diameter of 76,45 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FS1203
Impurities that are in the fuel are filtered out with a fuel filter. These are particles that should not be in the fuel, like water and dirt. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS1203of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FS1203 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. Check the connection when replacing the fuel filter.
The height of the product is 122,17 mm. The filter has an outer diameter of 76,45 mm.Properties
| Product number: | FS1203 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Outside diameter: | 76.45 mm |