Fuel separator spinon stratapore
| Product number: | FS1000 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 249.07 mm |
| Outside diameter: | 93.22 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |
Fleetguard fuel filter FS1000
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS1000of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1000 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 249,07 mm. The filter has an outer diameter of 93,22 mm.€43.69 * €52.86
€52.86 incl. VAT
€52.86*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel separator spinon stratapore"
Fleetguard fuel filter FS1000
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. If the fuel filter does not catch these particles, the engine would be full of these potentially damaging pieces. Replace the fuel filter when the guidelines for the fuel filter FS1000of Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FS1000 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. When the filter is used for a longer time it is a good measure to replace it for a brand new Fleetguard Filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 249,07 mm. The filter has an outer diameter of 93,22 mm.Properties
| Product number: | FS1000 |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 249.07 mm |
| Outside diameter: | 93.22 mm |
| Thread type: | 1-14 UNS-2B |
| Weight: | 1 kg |