Fuel filter spinon
| Product number: | FF5381 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Mack: | 483GB470M |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 180.09 mm |
| Outside diameter: | 107.67 mm |
| Thread type: | M22 X 1.5-6H INT |
| Weight: | 1 kg |
Fleetguard fuel filter FF5381
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FF5381of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5381 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 180,09 mm. The filter has an outer diameter of 107,67 mm.€22.15 * €26.80
€26.80 incl. VAT
€26.80*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel filter spinon"
Fleetguard fuel filter FF5381
Impurities that are in the fuel are filtered out with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter when the guidelines for the fuel filter FF5381of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5381 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Make sure you connect the fuel filter in the right way.
The height of the product is 180,09 mm. The filter has an outer diameter of 107,67 mm.Properties
| Product number: | FF5381 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Mack: | 483GB470M |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 180.09 mm |
| Outside diameter: | 107.67 mm |
| Thread type: | M22 X 1.5-6H INT |
| Weight: | 1 kg |