fuel filter FF5135A
| Product number: | FF5135A |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 150 mm |
| Outside diameter: | 79 mm |
| Micron rating: | 12 micron |
| Thread type: | M16 X 1.5-6H INT |
| Weight: | 0.43 kg |
Fleetguard fuel filter FF5135A
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5135Aof Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5135A fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 150 mm. The filter has an outer diameter of 79 mm.€17.69 * €21.40
€21.40 incl. VAT
€21.40*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF5135A"
Fleetguard fuel filter FF5135A
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5135Aof Fleetguard prescribe a replacement should be done. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5135A fit it.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. Check the parts manual for the place of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 150 mm. The filter has an outer diameter of 79 mm.Properties
| Product number: | FF5135A |
|---|---|
| Manufacturer | Fleetguard |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 150 mm |
| Outside diameter: | 79 mm |
| Micron rating: | 12 micron |
| Thread type: | M16 X 1.5-6H INT |
| Weight: | 0.43 kg |