Fuel filters/fws
| Product number: | FF5135 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| audi): | 68127177 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Filter Efficiency: | 16 |
| Micron rating: | 16 micron |
| Outside diameter: | 77 mm |
| Thread type: | M16 X 1.5-6H INT |
| Type filter: | Fuel filter |
Fleetguard fuel filter FF5135
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5135of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5135 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 156 mm. The filter has an outer diameter of 77 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF5135
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF5135of Fleetguard prescribe a replacement should be done. Before replacement, check the parts manual to make sure the FF5135 part fits for your machine.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. The Fleetguard fuel filter is developed to catch water and particles within its casing with special filtering techniques. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel enters the fuel filter through a specific inlet and the filtered fuel will exit through an outlet. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 156 mm. The filter has an outer diameter of 77 mm.Properties
| Product number: | FF5135 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| audi): | 68127177 |
|---|
Technical details
| Suitable for brand: | Toro |
|---|---|
| Product type: | Filters |
| Filter Efficiency: | 16 |
| Micron rating: | 16 micron |
| Outside diameter: | 77 mm |
| Thread type: | M16 X 1.5-6H INT |
| Type filter: | Fuel filter |