Fuel filter spinon
| Product number: | FF5108 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Hitachi: | 4178800 |
|---|---|
| Hitachi: | 4206080 |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 126 mm |
| Outside diameter: | 93 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FF5108 FF5108
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5108 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5108 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 126 mm. The filter has an outer diameter of 93 mm.€29.07 * €35.17
€35.17 incl. VAT
€35.17*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "Fuel filter spinon"
Fleetguard fuel filter FF5108 FF5108
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These are particles that should not be in the fuel, like water and dirt. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF5108 of Fleetguard. The parts manual of the machine provides all the information about the right parts, including whether or not the FF5108 fit it.
Replacing the Fleetguard fuel filter
The fuel starts pumping through the system, including the fuel filter, from the moment the engine is started. In the filter there is a purposely designed technique that separates the water and particles from the fuel and catches it in the filter. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. It is then time to replace the fuel filter for a new Fleetguard filter. Check the parts manual for the place of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. When mounting the part, check if the fuel filter is properly connected to the system.
The height of the product is 126 mm. The filter has an outer diameter of 93 mm.Properties
| Product number: | FF5108 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Hitachi: | 4178800 |
|---|---|
| Hitachi: | 4206080 |
Technical details
| Product type: | Filters |
|---|---|
| Height: | 126 mm |
| Outside diameter: | 93 mm |
| Weight: | 1 kg |