Fuel filters/fws
| Product number: | FF42003 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 134-2829 |
|---|---|
| Toro: | TO134-2829 |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Product type: | Filters |
| Thread type: | M20 X 1.5-6H INT |
Fleetguard fuel filter FF42003
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF42003of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF42003 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 85,5 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF42003
The fuel filter of Fleetguard cleanses the impurities from the fuel before it enters the combustion engine. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Replace the fuel filter when the guidelines for the fuel filter FF42003of Fleetguard prescribe a replacement should be done. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF42003 fits your machine.
Replacing the Fleetguard fuel filter
From the moment the engine is started, the fuel runs through the hoses and the fuel filter to the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. These water and pieces will slowly clog the filter. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual prescribes where the fuel filter is mounted on the machine. This will be somewhere between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 85,5 mm.Properties
| Product number: | FF42003 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Toro: | 134-2829 |
|---|---|
| Toro: | TO134-2829 |
Technical details
| Suitable for brand: | Jacobsen |
|---|---|
| Product type: | Filters |
| Thread type: | M20 X 1.5-6H INT |