fuel filter FF112
| Product number: | FF112 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Gmc: | 5574980 |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 222.25 mm |
| Outside diameter: | 101.6 mm |
| Weight: | 1 kg |
Fleetguard fuel filter FF112 FF112
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF112 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF112 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 222,25 mm. The filter has an outer diameter of 101,6 mm.€26.90 * €32.55
€32.55 incl. VAT
€32.55*
- Free delivery*, from €450 / £385 (excl. VAT)
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours (When in stock)
- Discounts, for companies
Product information "fuel filter FF112"
Fleetguard fuel filter FF112 FF112
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. These impurities are for example small particles that do not belong in the fuel and water. Without the fuel filter these particles could cause damage and irregularities in the engine to the point where the engine malfunctions. Ensure a regular replacement of the fuel filter FF112 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF112 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. After a while, the filter will be full of water and particles and this can impact the performance of the engine because the fuel cannot pass through the filter properly. Before the filter is fully clogged it is important to replace it for a new one. The parts manual describes the position of the fuel filter on the machine. Normally this will be mounted on a convenient place between the engine and the fuel tank. The fuel filter has an inlet for the fuel and an outlet for the cleaned fuel. Check the connection when replacing the fuel filter.
The height of the product is 222,25 mm. The filter has an outer diameter of 101,6 mm.Properties
| Product number: | FF112 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Gmc: | 5574980 |
|---|
Technical details
| Product type: | Filters |
|---|---|
| Height: | 222.25 mm |
| Outside diameter: | 101.6 mm |
| Weight: | 1 kg |