Fuel filters/fws
| Product number: | FF101 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Cummins: | 105211 |
|---|---|
| Cummins: | 299101 |
Technical details
| Product type: | Filters |
|---|---|
| Micron rating: | 20 micron |
| Outside diameter: | 100.84 mm |
Fleetguard fuel filter FF101
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF101 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF101 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 123,19 mm. The filter has an outer diameter of 100,84 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard fuel filter FF101
Particles that should not be in the fuel are filtered out of the solution with a fuel filter. This dirt could be water, sand or dust that possibly entered the fuel during a fill up. Without the filter these contaminants can reach the engine unopposed. Replace the fuel filter regularly with the fuel filter FF101 of Fleetguard. The parts manual of the machine tells you more about replacement intervals and the right parts, check if the FF101 fits your machine.
Replacing the Fleetguard fuel filter
The fuel runs through the fuel hose to the combustion chamber of the engine. The fuel filter is specifically designed by Fleetguard to filter out the water and particles from the fuel. When the machine is used for a long time, the filter will slowly start to fill up with the impurities. It is then time to replace the fuel filter for a new Fleetguard filter. The parts manual describes the position of the fuel filter on the machine. This is usually on a practical place between the fuel tank and the engine. The fuel filter is recognized by its inlet for the fuel hose and the outlet where the filtered fuel runs through. Check the connection when replacing the fuel filter.
The height of the product is 123,19 mm. The filter has an outer diameter of 100,84 mm.Properties
| Product number: | FF101 |
|---|---|
| Manufacturer | Fleetguard |
Replaces original
| Cummins: | 105211 |
|---|---|
| Cummins: | 299101 |
Technical details
| Product type: | Filters |
|---|---|
| Micron rating: | 20 micron |
| Outside diameter: | 100.84 mm |