Hydraulic filters
Product number: | HF7953 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 150.11 mm |
Fleetguard hydraulic filter HF7953
In a hydraulic system, oil ensures the transmission of the forces. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF7953 filters the pollution out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF7953
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. A hydraulic filter such as Fleetguard's HF7953 is a good and qualitative replacement for a worn hydraulic filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 450,85 mm. The filter has an outer diameter of 150,11 mm.- Free delivery, from €450 (excluding VAT).
- Standard delivery, 1 - 2 working days
- Express delivery, within 24 hours
- Discounts, for companies
Fleetguard hydraulic filter HF7953
In a hydraulic system, oil ensures the transmission of the forces. In almost all cases, a defect in the system is initially caused by contaminated oil. The moving parts wear out slowly and the oil absorbs these wear particles. Fleetguards hydraulic filter with number HF7953 filters the pollution out of the oil. In the filter, a fine-meshed system ensures that the particles are left behind and do not go back into the hydraulic system. Before you order the product from us, check if it is in the machines parts book to make sure it fits.
Replacement of the Fleetguard Hydraulic Filter HF7953
The hydraulic system works best when the hydraulic filter is replaced in a timely manner. A hydraulic filter such as Fleetguard's HF7953 is a good and qualitative replacement for a worn hydraulic filter. Where the filter is placed depends to a large extent on the location of the hydraulic system and the type of machine. For the periodic interval for replacing the filter and the location of the hydraulic filter on the machine, check out the parts book.
The height of the product is 450,85 mm. The filter has an outer diameter of 150,11 mm.Properties
Product number: | HF7953 |
---|---|
Manufacturer | Fleetguard |
Technical details
Product type: | Filters |
---|---|
Outside diameter: | 150.11 mm |